Handbrake Mod for Playstation - Fits Logitech Driving Force Shifter G25/G27/G923
Black
$79.95
Skip to product information
Handbrake Mod for Playstation - Fits Logitech Driving Force Shifter G25/G27/G923
$79.95
OG3D Handbrake Mod for Playstation - Fits Logitech Driving Force Shifter G25/G27/G923
Take your rally and drift racing to the next level with the original OG3D Handbrake Mod, custom-designed for PlayStation sim racing setups.
This 3D-printed mod features a spring-loaded lever mechanism that presses the controller’s circle button with a natural, satisfying pull – giving you the precision and realism of a true handbrake.
Designed for simplicity and as compact as possible, this sim racing mod is built for easy install and setup.
Compatible with Gran Turismo 7, WRC, Wreckfest, Drift CE, CarX Drift and many other racing games that allow dual device (controller and Logitech wheel) connectivity simultaneously.
Designed and created by sim racers, for sim racers – this mod not only improves lap times on dirt tracks but also transforms the overall sim racing experience.
Built and tested in-house by OG3D.
Whats Included
1x OG3D Handbrake mod base
1x Locking pin
1x m10 Sleeve bolt
2x Handles with triggers & springs (vertical and 'factory' angled)
Installation
- Disassemble the 2 screw clamps from your Logitech driving force shifter, removing locking nuts so the threaded rod can be removed.
- Once clamps are removed, slip the handbrake base plate over the Logitech shifter housing.
- Reassemble the shifter clamps and tighten the clamps to hold the mod base securely in place.
- Slip the preferred handbrake lever into the bracket on the handbrake base plate and fasten the sleeve bolt through the 10mm hole.
- Carefully align the trigger to the hole in the base plate, lock in place with the locking pin provided.
- Make sure both the controller and Logitech steering wheel are paired to the Playstation and connected.
- Turn the controller clamp knob anti-clockwise to loosen the clamp and carefully slide the PS controller joysticks into the clamp as far as they go (this will ensure the O button is aligned to the trigger).
- Tighten the clamp just enough so there is no movement in the controller but be careful not to over tighten as this could damage your controller!
- Rip In!
Customization Available
Looking for something a little different? We can customise sizes, colours and even add unique logos or designs. Just send us a message to create your own version!
Disclaimer
All OG Prints products are 3D printed aftermarket items. They are not OEM parts. While every effort is made to ensure strength and durability, 3D printed products may differ from factory-manufactured items. OG Prints is not responsible for misuse, incorrect installation, or modifications made by the customer.
Copyright © 2025 OG Prints - All Rights Reserved.